Analog to Digital Converter composes of the devices transforming an analog signal into discrete signals. It converts continuously varying signal with time into discrete signal. The Analog to Digital converter A/D converter trainer demonstrates ...
View details
AC/DC Load is an important device in all the Electrical laboratories. One can connect a load upto 1.2KW using this product. The device comes with On Board Switches, so that one can vary the ...
View details
AC and DC Starter Demonstrator is designed to explain the basic concepts of AC and DC Starters. A motor starter is a device used with AC and DC electric motors to temporarily reduce the load ...
View details
Advanced Analog Circuits Development Platform is designed to fulfill requirement of performing experiments of analog electronics in a single platform. This makes it easy to design, experiment with, and test circuitry without soldering. Students can ...
View details
Analog-Digital Circuits Development Platform is designed to fulfill requirement of performing experiments of analog and digital electronics in a single platform. This makes it easy to design, experiment with, and test circuitry without soldering. Students ...
View details
Analog-Digital Circuits Development Platform is designed to fulfill requirement of performing experiments of analog and digital electronics in a single platform. This makes it easy to design, experiment with, and test circuitry without soldering. Students ...
View details
Arithmetic and Logic Unit Trainer a compact, ready to use digital electronics experiment board. This product is useful for students to get a practical insight into the working of an ALU and understand the concept ...
View details
BCD Adder and Subtract or Trainer is a compact, ready to use digital electronics experiment board. This product has been designed specifically for the students to study and understand the concept of BCD addition and ...
View details
Clipper and Clamper Trainer has been designed specifically to study 13 different types of circuit for single level and two level clipping and 6 different types of circuit for clamping. The purpose of this training system is ...
View details
Color pattern Generator is designed for educational and service use. 14 Test patterns normally required for monochrome & color TV installations can be easily selected. Generates patterns and multicolor bars patterns provide video and RF modulated signals ...
View details
Compound Motor Compound Generator Lab is a useful training system for Electrical laboratories that provides comprehensive learning of DC Compound Generator. It can be employed for performing various experiments like Generator Working, Operating Characteristics, Terminal ...
View details
Counters Trainer is a compact, ready to use digital electronics experiment board. It helps students to get a practical insight into the working of the counters. Counters are undoubtedly the most important part of any ...
View details
Dielectric Constant Measurement is designed to measure Dielectric Constant of different solid materials like Teflon, Glass, Bakelite, etc. A dielectric substance is the electrically insulating material. An effective dielectric typically contains polar molecules that reorient ...
View details
Cut Section of Machines is an important part for all Electrical laboratories. Study of these machines is integral part of any educational course in Engineering. Student can easily understand various parts and operation of these ...
View details
Data Acquisition/Switch System with modular structure, which combines precision measurement capability with flexible signal connections, can provide versatile solutions for the applications with multiple points or signals to be tested in product performance test ...
View details
Technologies launch Data Acquisition Card. It is very useful for sensing and controlling analog and digital signals of any process. It makes easy and interesting to interface real world signals with PC through USB bus. ...
View details
DC Compound Motor Lab is an exclusive training system designed for Electrical laboratories to demonstrate the operation of DC compound motor. Students can understand the fundamental operating principle of DC Compound Motor. This product includes ...
View details
Differential Relay Training System is a very significant product from power System lab for Electrical students. Differential Relay has operating coil connected in series with small choke and capacitor forming a series resonant circuit. In ...
View details
Votes 18 v Battery 2.0 ah Charger 18 v Easy to operate Fine grip Cordless
View details
Earth Fault Relay Testing System is designed to provide exposure of protection device used to prevent faults in electrical circuits due to earth leakage current. The protection of electrical system is required to maintain any ...
View details
Voltage : 220 V. Speed : 2600 RPM. Power consumption : 450 W. Fine grip.
View details
The “Electrical Safety Demonstrator is a useful board for students to understand the basic concepts and fundamentals of many electrical safety standards. Before working with any electrical or electronic device, it is essential to learn ...
View details
AC supply : 220-380. DC Output Voltage : Fixed: 200 V, 3 A Variable : 0-200 V, 12 A Analogue Voltmeter : 300 V Analogue Ammeter : 15 A Mounting facility for domestic components.
View details
Electrical Workstation offers an excellent approach to the teaching of Electrical Machines principles by introducing a unique modular designed control unit. It provides flexibility for the students to carry out experiments over AC and DC ...
View details
Field Test of DC Series Machine is an important training system for Electrical Machine Laboratories. It is designed to provide the thorough study of DC Series Machine under different excitation and loading conditions. Field test ...
View details
Flash Point Testing Apparatus is a unique testing system for the Electrical laboratories design to determine the lubricant’s volatility and fire resistance in terms of flash and fire point and hence predetermine the reliability ...
View details
Home Electrical Wiring Training System is a product which is helpful for students to get familiar with home wiring circuits. This product provides a realistic training environment which is essential for every electrical engineering student ...
View details
Hopkinson’s Test of DC Machine is an adaptable training system used for Electrical Laboratory. It is designed to demonstrate the fundamental concepts and also facilitates easy learning about the various losses of DC Machine. ...
View details
Induction Motor Compound Generator Lab is an adaptive training system for Electrical laboratories. It is designed to demonstrate the fundamental concepts of DC Compound Generator on different loading conditions. The diagrammatic representation is provided on ...
View details
Induction Motor Series Generator Lab is a training system designed to provide comprehensive learning and functioning of a DC Series Generator. It can be used for performing various experiments like Operating Characteristics, Terminal Voltage v/...
View details
Induction Motor Shunt Generator Lab is a significant training system for Electrical Machine Laboratories to demonstrate the operational working and characteristic of DC Shunt Generator under different loading conditions. DC Shunt Generator is a type ...
View details
MCB (Miniature Circuit Breaker) and HRC (High Rupturing Current Capacity) Fuse Testing System is designed to explain the operating behavior and characteristics of MCB’s and HRC fuse. It includes B type MCB, C type ...
View details
Measurement of XD and XQ of Three Phase Synchronous Machine is an exclusive product designed to demonstrate the operating principle and functioning of Three Phase Synchronous Generator. This machine lab can change the mechanical energy ...
View details
Power Supply 380 v/50/60 Hz Stator I.D. 110-210 mm Stator O.D ≤Φ301 mm Overhang coils height 20-85 mm Slot Number 24-60 Lacing Speed 0.7 s/s Power Supply 380 V/50/60 Hz 7 Kw
View details
Over Current Relay Testing System is a useful learning product for electrical laboratories. Over Current Relay a monitor general balanced overloading and has current/time settings. These settings determine the protective schemes. The relay is ...
View details
Parallel Operation of Two Single Phase Transformer has been exclusively designed to demonstrate the fundamental concepts of parallel connections of two or more single phase transformers. One can load the transformer more than the rating ...
View details
Power Factor Demonstrator is a unique product that to demonstrate the significance of Power Factor in an electrical circuit and explain basic concept and importance of Real Power, Apparent power, Reactive Power. It contains various ...
View details
Power Measurement by Two Wattmeter Method is an exclusive and useful product for Electrical laboratories. It is designed to explain the students, how total power is measured in a three phase circuit using only two ...
View details
Power Measurement using CT & PT setup is designed to explore the measurement techniques used in electrical meters for measurement of Voltage, Current, Power etc. Current Transformer (CT) and Potential Transformer (PT) are used to sense ...
View details
Mobile work station. Input Power: 3 phase, 5 wires. Ac 380 V/ 50 Hz DC 0-10 V/ Capacity: 1 KVA. Training Purpose of machine: Understand the operation of a PLC. Learn to troubleshoot the PLC, Inputs and Outputs. Learn to ...
View details
Radial and Ring Main Distribution System is specially designed to illustrate the working phenomenon of Distribution System configured as Radial and Ring Main Distribution System. Distribution System is the part of electric power system which ...
View details
Scott Connection Demonstrator is a vital training system for the Electrical Laboratories. It provides comprehensive learning of Three Phase to Two Phase Conversion in a very simple manner. It helps to study and analyze the ...
View details
Shunt Motor Series Generator Lab is an elite training system for the Electrical laboratories. This product helps students to understand basic operations of DC Series Generator. It can aptly be used for performing various experiments ...
View details
Single and Three Phase Inductive Load is suitable for loading Single Phase and Three Phase supplies and generators. It consist three variable inductive coils. Two terminals for each phase are given which are externally accessible ...
View details
Single and Three Phase Resistive Load is a high wattage resistance network suitable for loading Single Phase and Three Phase supplies and generators. The load banks are used to verify the performance of power sources. ...
View details
Single Phase Bridge Converter Drive is an Elite Training System for Power Electronic Lab to demonstrate the operational functioning of Single Phase Bridge Converter. It includes experiment such as speed control of DC Motor by ...
View details
Single Phase Induction Motor Lab is an exclusive and attractive training system for the electrical laboratories. It provides complete learning concepts of Single Phase Capacitor Start Induction Motor. Separate terminals have been provided for main ...
View details
Single Phase Transformer Lab is an elite training system for the Electrical laboratories. The product helps you to get fully acquainted with the basic concepts and functioning of a Single Phase Transformer. The product is ...
View details
Slip Ring Induction Motor Lab is an adaptable training system for the electrical laboratories. The product helps to understand the basic concepts and functioning of a Slip Ring Induction Motor. This system gives practical knowledge ...
View details
Mobile workstation with solar photovoltaic components, PC-based interactive, Multimedia student curriculum; Installation manual and teacher’s guide. Calculate PV circuit voltage and currents, various loads, Mobile workstation is equipped with silk screened labels for component ...
View details
SUMPNER’S Test of Single Phase Transformer is a very exclusive and important product designed for students of Electrical Engineering to explain the basic concepts of SUMPNER’S test. With this trainer, students can learn ...
View details
Synchronous Machine Training System is an exclusive product designed to demonstrate the fundamental concepts of parallel operation of Three Phase Synchronous Generators. This product is equipped with advanced measurement system for AC Parameters and DC ...
View details
Type : Electro-mechanical Voltage at Synchronism : 110 V ± 2% Operating Voltage : 110 V ± 20% Frequency : 50 / 60 Hz ± 5% Synchronizing Condition : Dark lamp method Accuracy : 2° Angle of Rotation : 360° Power Consumption : 3 VA for MAINS – (I) & 6 VA for GENERATOR – (II) Insulation Resistance : Greater than 20 at 500 ...
View details
Three Phase Induction Motor labs is an adaptable training system for the Electrical laboratories. The product helps you to get fully acquainted with the basic concepts and functioning of a Three Phase squirrel cage Induction ...
View details
The Three Phase Lab with Three Phase Low Voltage Power Supply is an elite training system for the electrical laboratories. This three phase low voltage supply that provides 18 V of low voltage which is highly ...
View details
Electrical Requirement : 220V/50Hz Capacity to transfer up to four Mini-PROTEAN precast or handcast gels, or three Criterion gels Single-step locking system allows simple, speedy setup Platinum-coated titanium anode plate electrodes and stainless-steel cathode plate ...
View detailsCopyright © 2019. all rights reserved. Website designed by AV Web Solution
Expert Labo Has Regular Exports To The Following Countries: Afghanistan, Albania, Algeria, Andorra, Angola, Antigua And Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia And Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma/ Myanmar, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Congo, Costa Rica, Cote D'Ivoire/Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakstan, Kenya (Nairobi), Kiribati, Korea, North, Korea, South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Portugal, Qatar, Romania, Russia, Rwanda (Kigali), Saint Kitts And Nevis, Saint Lucia, Saint Vincent And The Grenadines, Samoa, San Marino, Sao Tome And Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad And Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, United Arab Emirates (Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
