Power : 300 w Max. Rim Diameter : 24 inches Power Supply : 220 V,50 HZ /380 V Type : 3 D wheel alignment G.W. : 296 Kg Color : RED Control : Blue tooth remote control With Camera
View details
Didactic equipment Lever Operated, 4-way, three positions, Tandem Centre Two cylinders- one with adjustable proximity switch and one Resistive load spring Fixed volume Vickers V10 Vane Pump, with pressure Gages 2 plumbing Tees and parallel, flow ...
View details
The equipment comprises a long smooth walled pipe connected to the suction side of an electrically driven centrifugal fan. The fan discharge pipe terminates in a flow-control damper for closed-conduit work or a plate containing ...
View details
Voltage range : 0 ~ 60 V Current range : 0 ~ 7 A Power range : 0 ~ 150 W Low noise : < 3 m Vp-p Fast transient response time : < 50 us High-speed programming Wide range of voltage & current combinations in constant power Precision V&I measurements Standard GPIB/...
View details
Oscilloscope screen 300 mm. Tachometer screen 7500 mm. In two ranges, Dwell angle 0-60 deg, 0-90 deg. Volt ammeter 0-20 volts in two ranges Screen Resolution 1024 x 600 Touch screen type: Capacitive touch screen Operating Temperature range: -10⁰...
View details
Auto- electrical components of 12 V Fitted on metal chassis Wiring layout as in a vehicle Frame: Steel Function: Automotive training
View details
Bandwidth : 20 MHz Channels : 2-4 Resolution : 12 bit (16 bits enhanced) Sampling rate : 400 MS/s Buffer memory : 250 M samples Input ranges : ±50 mv to ±200 V in 12 ranges Software supplied : Pico Scope, Pico Diagnostics
View details
Axial fan mounted on a stainless steel plinth. Transparent air inlet and air outlet ducts allow the fan construction to be clearly observed. A manually operated adjustable aperture allows the air flow rate to be ...
View details
The position of the met centre can be varied to produce stable and unstable equilibrium. The equipment consists of a plastic rectangular floating pontoon, whose centre of gravity can be varied by an adjustable weight, ...
View details
Low cost, effective teaching. Self-contained. Bench mounted. 5 different lever ratios. Direct readout of reaction by spring balance.
View details
The test section consists of a classical Venturi machined in clear acrylic. A series of wall tapings enable measurement of the static pressure distribution along the converging and diverging duct. A total head tube is ...
View details
Parameter Range: Precision RPM: 0~8000 rpm 1% Ignition: ADV 0~60° ±1° Ignition voltage: 0~40 KV 5% Spark voltage: 0~4000 V 5% Ignition duration: 0.04~9.99 ms 0.04 ms Cranking current: 0~900 A 5%
View details
This accessory consists of a circular Venturi-shaped test section manufactured from clear acrylic to enable visualization inside the section. As the flow of water increases the pressure at the throat falls in accordance with the ...
View details
A motor driven multi-stage centrifugal compressor, mounted on a stainless steel plinth with transparent air inlet and air outlet ducts. A manually operated adjustable aperture allows the air flow rate to be varied at constant ...
View details
This accessory comprises a variable-speed pump assembly and independent discharge manifold interconnected by flexible tubing with quick release connectors. This auxiliary pump is intended to be used in conjunction with the basic Hydraulics Bench. The ...
View details
Swing Over Bed : 330 (mm) Distance between centers : 635/1000 (mm) Spindle Bore : 40 (mm) Speed spindle : 40-2500 (rpm) Spindle Motor Power : 2.2 ( kw) CNC Router, 3-axis setup. Windows 7 or latest operating platform 19” flat screen monitor with 2 USB connections. Network ...
View details
Table size : 1600 mm x 400 mm Number of T slots : 3 Maximum load : 800 kg Cutting feed speed : mm/min 19-950 CNC Router, 3-axis setup. Windows 7 or latest operating platform, 19” flat screen monitor with 2 USB connections. Easy input ...
View details
Drilling capacity in steel : 13 mm Drilling depth : 100 mm Distance between column and spindle : 175 mm Number of speeds : 8 Speed range : 500 – 4000 r. p. m Size of table : 250 x 250 mm Motor : 3 phase 0. 5 KW CNC Router, 3-axis setup Windows 7 ...
View details/1.jpg)
Material Thickness : 1 mm- 6 mm Rollers Length : 2600 mm
View details
Power main motor : 3 Kw Lifting motor : 1, 1 kW Drilling capacity in steel : 40 mm Continuous drilling cap. Steel(S235JR) : 36 mm Tapping capacity : M30 Throat : 280 mm Working surface table Length x width : 940 x 600 mm Working table cube ...
View details
his is the best known vertical type fire tube boil. The shell is about 25 cm in diameter and 60 cm. High. The cylindrical fire box is with a door and grate at its bottom. Hot gasses ...
View details
It consists of a metallic pulley of 30 cm. diameter with two grooves one for rope and the other for belt. At back a circular sturdy wooden disc graduated at 10 degrees interval is provided. A rotating ...
View details
Consisting of a wooden plane 90 x 18 cm having adjustment for setting the required angle precisely. Complete with friction less pulley, linear and circular scale, pan, a wheeled trolley and a set of eight slide draws ...
View details
Consisting of a jack screw of T. P.I and start carrying load platform. The nut of the screw is fitted on a pedestal bearing and is keyed to a worm gear of 40 teeth operated ...
View details
Student quickly grasps a clear understanding of the mechanical advantage of the wheel and axle using this all metallic smooth running apparatus. The wheel is of 35 cm dia. and axle in 3 steps of 20, 10 and 5 cm ...
View details
wall mounted vertical bracket houses two independent mechanisms side by side for testing tension and compression springs. left hand side tests tension springs whilst the right hand side tests compression spring. set of springs is ...
View details
The 18 pressure monitor points are located on the front panel of the unit with adapters to allow flexible plastic tubing to be attached. Two different sizes of tubing can be used (2 mm and 3 mm inside ...
View details
It is a small wind tunnel designed for bench top operation. Air is drawn through the working section by a variable speed fan at the discharge end of the tunnel. A honeycomb flow straightened is ...
View details
appearance this boiler model is similar to Lancashire boiler with the difference that one fire tube passes from end to end.
View details
Dead Weight Pressure Gauge Calibrator consists of a precision-machined piston and cylinder assembly mounted on leveling screws. A Bourdon gauge is supplied for calibration. The weights supplied are added to the upper end of the ...
View details
This accessory comprises a miniature Pelton wheel with spear-valve arrangement mounted on a support frame, which fits on to the Hydraulics Bench top channel. Mechanical output from the turbine is absorbed using a simple friction ...
View details
Determination of brake power & mechanical efficiency at different load conditions. Determination of fuel consumption & brake specific fuel consumption, brake thermal efficiency. Determination of air consumption & volumetric efficiency, Air/Fuel Ratios. Calculation of Heat balance of ...
View details
Speed range up to 3750 rpm. 3-phase power supply 380 V±10% Standard oil atomizer Pintail. Motor: 3 phase. Output power: 5.5/7.5/11/15/18.5/22 kw. Testing high pressure of oil supply: 0-3.5 MPa. Mode of speed regulation Frequency control Testing low pressure ...
View details
Arcing current : 180 A, 4.6 kw/ 50 HZ, 5 KW/60 Hz Multi-process : CC/CV machine
View details
Output Voltage: 220 V Output Current: 0-200 A Operating Mode: Used independently or with a constant current module Protection Performance: Input terminal over voltage protection Prompts on the LCD Reverse polarity protection, buzzer alarm 85º C Overheat ...
View details
Cooling Way : welding flux cooling Frequency range : High frequency Electric Current : Inverter
View details
Training board using 220 V AC power supply. the internal circuit transformer rectifier into 12 V DC power supply. No battery, reduce the trouble of charging, 12 V DC. Power supply has anti-short circuit function. Operating temperature: -40℃~+50℃. ...
View details
Transmission : Automatic Input Voltage : AC 220 V Power Supply : DC 12 V Battery Capacity : 60 Hz Operating Temperature : -40 C + 50 C Max. Power (KW) : 68 Max. Power Seed (RPM) : 6000
View details
The equipment is mounted on a free-standing framework which supports the test pipe work and instrumentation. The following typical pipe fittings are incorporated for study: miter bend, 90° elbow, swept bends (large and small radius), sudden ...
View details
Diameter of test pipe 3.0 mm Length of test pipe 560mm Range of water manometer 500mm Distance between pressure tapping points 510mm Measuring cylinder capacity 1000ml Range of mercury manometer 500mm
View details
Battery – characteristics: 3000 mA, Lithium polymer Operating System: Android Expansion memory card: Supporting 32 G Micro SD (TF) card Screen size: 7.0 inches Screen Resolution 1024 x 600 Touch screen type: Capacitive touch screen Operating Temperature range: -10º C to 55º ...
View details
Category: Fluid Mechanics Equipment Description Product Enquiry DEMONSTRATION & VISUALISATION CAPABILITIES:- Demonstrating basic phenomena associated with open channel flow Visualization of flow patterns over or around immersed object TECHNICAL SPECIFICATIONS:- Clear acrylic working section ...
View details
The Flow Meter Demonstration Unit is a self-contained facility to demonstrate the important characteristics of flow meters. The main elements are a service module and flow meter support stand. A self-priming centrifugal pump draws water ...
View details
Flow over Weirs consists of five basic elements used in conjunction with the flow channel in the molded bench top of the Hydraulics Bench. A quick-release connector in the base of the channel is unscrewed ...
View details
Pipe friction is one of the classic laboratory experiments and has always found a place in the practical teaching of fluid mechanics. With this unit friction head losses in straight pipes of very different sizes ...
View details
The equipment is mounted on a steel-framed bench fitted with castors. A variety of measuring devices is incorporated either fastened to the back of the bench or free-standing. Water is stored in a polythene tank ...
View details
The apparatus is constructed from PVC and clear acrylic and consists of a vertical reservoir containing water that is connected to a series of vertical manometer tubes. These tubes can be used individually or in ...
View details
model represents the internal structure of engine. The internal surfaces are finished in different colors to indicate air, fuel and gas mixture and exhaust gas contents. The crankshaft can be rotated by hand wheel to ...
View details
The apparatus comprises a clear acrylic cylinder on a plinth designed to produce and measure free and forced vortices. The free vortex is generated by water discharging through an interchangeable orifice in the base of ...
View details
It is very interesting to study the different law of friction with it comprising of a 75 x 15 cm wooden board and a friction less pulley at one end a scale pan with the following accessories ...
View details
The Gear Pump Demonstration Unit utilizes a gear pump which is the most widely used of the positive action rotary pumps. Two gear wheels operate inside a casing. One is driven whilst the other rotates ...
View details
Programmable Heat Treatment Cycles Maximum Temperature : 12320 C Optional : 13160 C Volume : 0.030 m³
View details
The apparatus consists of an identical Hooks coupling at each end of a shaft. The axis of each coupling can be independently varied relative to the main shaft axis. Each coupling has a pointer and ...
View details
Hooke’s Law apparatus to demonstrate the relationship between the extension of a spring and the load applied to it. Consists of a movable 120 mm scale that is mounted on a stand and base. Comes ...
View details
The flow channel of the Hydraulic Flow Demonstrator is constructed using clear acrylic for visibility and is supported by a floor-standing, metal frame fitted with castors for mobility. The flow channel consists of an inlet ...
View detailsCopyright © 2019. all rights reserved. Website designed by AV Web Solution
Expert Labo Has Regular Exports To The Following Countries: Afghanistan, Albania, Algeria, Andorra, Angola, Antigua And Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia And Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma/ Myanmar, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Congo, Costa Rica, Cote D'Ivoire/Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakstan, Kenya (Nairobi), Kiribati, Korea, North, Korea, South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Portugal, Qatar, Romania, Russia, Rwanda (Kigali), Saint Kitts And Nevis, Saint Lucia, Saint Vincent And The Grenadines, Samoa, San Marino, Sao Tome And Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad And Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, United Arab Emirates (Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
